• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

throttle

  1. I

    Sensitive Throttle

    Evety time I drive my rig it feels like the throttle is very sensative. I can't crawl slowly and it feels like there's a deadzone in the transmitter but when I press the trigger lightly, the light on the esc turn on and it's receiving the signal. But it won't move untill I press it more but then...
  2. C

    Throttle takes some time to work

    I've changed some settings on my esc but now I got a strange behavior. When I turn on the TRX-4 the steering works immediately, but the throttle takes about 1 or 2 minutes to start working. :(
  3. T

    No Drag Brake and Delayed Reverse on Throttle

    Hi all, Total newbie here. I have had a 1.9 Wraith for several months and finally decided to do a 10.2 builder kit replica of my 1:1 jeep. So my issue is this, on my 10.2 build I seem to have no drag brake and to get it to go into reverse, I have to hit the trigger twice in the reverse...
  4. tinyT1m7

    4x4 flips after releasing throttle?

    Just got an axial bomber 4x4 used. It goes 20mph+ and after releasing from full throttle the truck flips forward not using brake at all. I have to slowly release throttle. Is this normal?
  5. T

    ******servo not working*******

    Hey guys. OK, Ive just recently put in a external bec ( because the other one fried) and the throttle works and everything but when i turn the steering wheel the servo doesn't even move a bit, but when i turn the steering trim it turns. I'm running really low on cash because i just spent $185...
  6. V

    Im New & learning - scx with castle sv2 - throttle curve help

    Hi, I have a stock scx 10 honcho but i do have the castle sv2 speed control and wondered if anyone has a guide of what i should tyr my throttle curve at and if i should adjust brake curve. Maybe there is something else i should also try in the programming. oh yeah, one other thing. Is there...
  7. E

    throttle using servo

    Hi I'm not quite sure if I'm in the right place for this, but was wondering as I have a traxxas tq3 radio an a receiver. I can get one servo to turn using the steering of the radio, but i wanted the other servo to turn using the throttle. I tried plugging the servo straight in an pressing the...
  8. crazywolf

    Rooster Crawler and Integy 35T lathe problem

    I bought this setup to run on my scx-10. I got it all wired up with my traxxas TQ 2.4ghz receiver and a hitec steering servo. I went through the programming and everything acted as it should. However the motor doesn't move when I pull the trigger. Any help would be appreciated.
Back
Top