• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

steering

  1. M

    Integy Billet Rack and Pinion?

    I had previously tried the BMRC and GCM vertical front shock tower mounts. Along with those I tried a Traxxas bell crank and some other parts to hodgepodge something together. Never was happy with what I got to work, but eventually went back to stock. The factory plastic rack is good when new...
  2. T

    SCX10ii Steering Horn Interference

    I may be posting this in the wrong place, but I've looked and can't find any good info on this. Each of the 10ii builder kits I have assembled have given me trouble with the steering servo horn (metal horn) hitting the frame and shock mount/panhard mount. I have been grinding the frame a...
  3. W

    Binding wheels after steering knuckle refit SCX10-2/RC4WD

    hello folks, I replaced the steering knuckles on my AR-44 axle with some RC4WD alloy ones, which went on smooth and initially felt great. But when I reinstalled the wheels they were binding making revolving near impossible, I need to back off the locknut a good full turn to free them up. Have I...
  4. J

    FTX Outback 2 Suspension

    Hi all, I'm very new to crawling and am in need of some assistance. I recent the economy root and purchased a FTX Outback 2 crawler. My Outback seems a bit light on the weight side and I feel the springs on the shock are too stiff for the vehicle. With all this in mind, what would be your...
  5. R

    Everest Gen7 Pro Receiver Issue

    Hey All, New to the forum. Picked up a Redcat Everest Gen7 Pro a few months ago and have been enjoying it greatly. Not new to the RC hobby but having an issue with the Gen7 I'm seeding some input on. Have done a few things to the truck but not much. Modified the steering as per some You Tube...
  6. M

    Steering problems with the Redcat Racing Sumo Crawler

    When I try to steer, both front and rear wheels won't turn. Both servos also makes a high pitch noise as I try to steer on the remote. I replaced the old servos with new ones but It still doesn't steer. Switching steering modes doesn't help and the throttle works fine. Do I just have bad luck...
  7. J

    Trying 4 wheel steering but servos twitch intermittently

    Edit: to save any googlers out there some time... it was the remote control or receiver. I just returned it and the new one of the same model has not glitched once. I bought the lansu 3 channel transmitter that can cycle through steering modes. I also installed a bec set at 6v. For some...
  8. B

    no steering, servo good

    my sons bomber stopped steering, i first thought it was the horn so i replaced it with out looking to much into it. this didn't resolve the issues i noticed when the servo is disconnect from the horn the gear barely moves (if at all). so i ordered a new one, the new one does the same thing. so i...
  9. Z

    Steering return to center slowly (barely)

    I have a Rockslide RS10 XT that we have been hobbying around with for a while. I can't pinpoint when it happened because my son uses it most, but when we steer the wheels do not center when you let go of (or center manually) the wheel on the controler. I read a bit around here and replaced my...
  10. O

    Redcat steering thread

    Pics added 7/18. I have been hesitant to start this thread because I have no means of taking pictures and proving what I say. I have been tinkering with my Redcat Rx10's steering for 3 years now. Here are some of my actual experiences and opinions based on experiments I have tried. I'll start...
  11. S

    R1 Steering Revisited

    After reading other threads on steering mods for the R1, I notched my knuckle arms but was disappointed to find that it did not improve my steering throw. Upon closer investigation, I discovered that the problem was with the 7* C-Hubs that I had installed. While the 7* C-Hubs are effective in...
  12. S

    CMS limits steering?

    Hey guys, still a bit of a newbie here but thanks to all the great threads and advice in the forums I feel far more confident then I ever used to. I installed an RC4WD CMS/Panhard kit on my wraith. I know there is no performance gain, but I like the idea of being able to easily separate the...
  13. B

    Reversed steering??

    First of all, yes, I have looked and looked before I started this thread. I'm *NEW* to RC's and don't know jack about them. So don't hate. I replaced my stock wraith's steering servo, with a digital Savox SA-1230 SG. I was careful to note which way the factory servo was plugged in and plugged...
  14. merin_83

    Steering issues

    Hi Guys, I have the new wraith poison sypider, and installed the castle BEC 10A and 3S lipo 2200mah (20C), the issue i face is that when on rock or hard surface, some times the tires wont turn even if i give steering inputs. But as soon as i move feet or so, the wheel turns, what...
  15. M

    Problem in steering (Nylint 1/18)

    I have a Nylint Rock Crawler 1/18 and am having steering problems. Yesterday, I had to see the direction and it works well without being stuck to the wheels. So I think the problem is the wheels, as dust and sand are hampering direction. Only it can not take the wheels off. Someone can explain...
  16. R

    Steering problem

    Okay so to sart off my ESC is a axial AE-2 and my controller is the AX-3.. okay so when I turn my controller and ESC on my steering goes all the way to rigt and I have no steering.. But I can still give it throttle and all that works just no steering..
  17. B

    Steering wobble

    I have yet another problem that has been bugging me for some time. When I turn front wheels all way to either side and apply medium or full throttle, the front axle becomes really wobbly. Here is a video: Steering wobble - YouTube I wonder if it's normal to behave like that. I tried to figure...
  18. laxjj14

    ackerman steering help

    I need help setting up ackerman steering with my clod axles ive looked at a bunch of pictures but i cant figure out how to make it work. Pictures of it would be very helpful
  19. X

    scx10 Chassis Mounted Servo CMS mod detailed write up

    Hoping a mod can make this a sticky Hello well i was tinkering the other day after seeing they want about 50$! for a CMS kit and came up with this and figured id do a write up for you fellow scx10 guys and gals. All in all it should cost about 1$ and 10mins of your time. Tools needed: File...
  20. R

    steering and servo questions

    just wondering what you need to get steering in the back connected the the steering in front and where i can get it:?:
Back
Top