• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

scx10ii

  1. M

    Tundra scx10ii

    I'm interested in putting a 2nd Gen tundra body on my scx10ii. I've seen a few builds with the tamiya body but all I can find are the front cab. Where does one find all the little accessories like headlights grill and badges and the back half of the truck? Anyone done a similar build that had...
  2. S

    Looking for recommendations on LCG rails

    Hello everyone. I’m currently on the hunt for some LCG rails. But here’s the catch... I would like to be able to transfer all my Rock pirate RC upgrades over to them. Servo/winch plate, battery tray, and shock mounts. The bed too, but I feel as though that has less impact on the rail selection...
  3. S

    Shocks for SCX10 II build with LC70 body

    Currently putting together a my SCX10II raw builders kit... and like a dummy I forced too much pressure onto one of my shocks after building it causing it to crack open. No big deal as they looked kind of cheap anyway. But my question now is, what shocks to get? I’ve seen this question asked...
  4. O

    Newbie shock length help?

    Hi! I'm looking for advice on shock length for my scx10ii honcho. I recently acquired new proline hyrax tires and love everything about them except the rub when at full tuck and turn. I plan on shaving the front fenders but I was also looking at the 100mm desert lizard shocks but, I have herd...
  5. JatoTheRipper

    Axial Behind the Scenes and History with Cofounder Matt Kearney

    Harley Designs and Scale Builder's Guild had a great livestream interview with Matt Kearney who is better known as a cofounder of Axial Racing. Matt was also heavily involved in the design and engineering of some Axial rigs including the SCX10 III. He also gave us the early and awesome Axial...
    • JatoTheRipper
    • Thread
    • axial behind the scenes bts history interview scx10 scx10ii scx10iii
    • Replies: 3
    • Forum: Videos!
  6. N

    Wheel Wells - SCX10II Jeep Wrangler

    Hey all, I am trying to find a good pair wheel wells (inner fenders) for my 9yo's SCX10 II with the Jeep Wrangler Unlimited body. He is hit by the "scale" bug and thinks that doing this, along with a flatbed trailer is going to be amazing. I have seen some for sell on eBay, A-MAIN, and...
    • nmsuman
    • Thread
    • scale scx10ii wheel fender wheel well wrangler
    • Replies: 5
    • Forum: Axial SCX10 II
  7. N

    New to forum and crawler world

    Hi everyone, I’m new to the scene of crawlers but have been in the RC hobby for many years with stadium trucks, planes, and helis. I picked up about 4 weeks ago a scx10 ii renegade and so far been blown away by how well it handles terrain. I haven’t done much except wheels and tires and got...
    • Nave0888
    • Thread
    • scx10 scx10 ii rtr scx10 ii. rubicon scx102 scx10ii
    • Replies: 3
    • Forum: Axial SCX10 II
  8. J

    My motor is making a high pitched noise, and it's not the normal noise from an esc

    I just installed a new motor and ESC in mt scx10ii, I installed a 27t brushed axial motor and hobbywing brushed crawler ESC. I am hearing a noise that sounds like the gear mesh and i can't figure it out, I tried adjusting the mesh but it just keeps the same constant loud grinding/squeaking...
  9. B

    Redcat Gen 7 Portals On SCX10II Honcho

    Howdy, I just got a set of Redcat Gen 7 Portal Axles in the hope that I can Mount them on my SCX10II Trail Honcho. I had some difficulty when it came to connecting the rear 4 link to the axle. Does anyone have any tips and or ideas on how I can fit these axles? Thank you all ahead of...
  10. 1

    Stock Locker Question

    I do not own the scx10ii, but I am looking at using the stock locker for the female half of a homemade spline shaft in a portal axled ifs/irs truck. My question is: Does the stock locker have the machined axle hole all the way through it (as shown in their promotional image below)?
  11. R

    Need upgrade advice

    I got my Trail Honcho today and installed some upgrades I had bought in anticipation. Beadlock axial wheels with hyrax tires, aluminum servo horn, HH 27t 550 motor(dremeled the battery tray) and waiting on a heyok bec to install my savox 1211 waterproof hv servo. I have a set of the 8 emaxx big...
  12. B

    Brushless motor and esc Revolver/Mamba X

    Looking to upgrade my scx10ii wrangler with brushless. What does everyone think. Mamba esc motor combo package. Or the Revolver sensorless 540 motor and a suggested esc to match. Also thinking HH hv500 servo.... thoughts?
  13. M

    Nukizer Truggy build2

    So i ended up breaking the back off my previous nukizer build. was never quite the same after the daughter fell on it and broke it :( Have been slowly ordering up parts for this build and running the standard Cherokee body. Parts for this build: Nukizer body cab Rubicon Interior Quicrun...
  14. J

    my SCX10 II scale videos

    Hello, here i will post my videos of SCX10 II. It is never ending wip, so i will post updates of my build. Currently it is pretty simple setup with Stock SCX10 II kit chassis Hobbywing sensored combo 17+kg servo Proline Lightbar (came with factory defect, waiting for a replacement) Some scale...
    • Jefik
    • Thread
    • axial axial scx10 ii scx10ii scx10ii video
    • Replies: 0
    • Forum: Scale Videos!
  15. Z

    SCX10II RTR Shorter Links

    I am not new to RC but I have never tried to shorten the suspension links. I got an Axial SCX10II for Christmas and I want to put the Proline Ford Bronco body on it. I was wondering if I could put the 12" links from the original SCX10 on the SCX10II.
  16. Z

    SCX10II Links

    I am thinking about getting the Proline 1973 Ford Bronco body, but it has a 12" wheelbase. Could the 12" aluminum links for the first generation SCX10 fit my SCX10ii?
  17. M

    MrLee1990 Nukizer SCX10ii Build

    Hi all. first scale/trail rig ive built and new to this side of RC. How it currently sits: So it all started when i brought my daughter a 1/18 ecx temper crawler for her birthday as she wanted a car to play with when i was out with the SCT. It wasnt fast and went everywhere, perfect! Then i...
  18. Dbx

    Scx10ii with Land Rover D90 body

    My scx10ii just turned up today 8) Being British, a Jeep Cherokee is not something i'm really familiar with. I have a number of plans for this chassis, but i'm probably going to start out with a D90 Land Rover body. I've searched for threads on who has fitted a D90 the mkii, but can't find any...
    • Dbx
    • Thread
    • d90 defender raffee scorched parts scx10ii
    • Replies: 65
    • Forum: Axial SCX10 II
  19. S

    New Guy With Build Issues - Top Shaft/Spur

    Hi Guys - Well I got my kit delivered from Amain Hobbies yesterday. I started working on it last night and got as far as building the transmission and I have some issues. The top shaft/spur gear has a ton of play. It moves forward and back about 5mm. I read the instructions and rebuilt it...
  20. N

    Alex's JeepSpeed Build

    Well, I'm starting this thread to track the progress on my Jeep Build. I'm using Evo 1 as my inspiration for this build. Not going for an exact replica, but using some ideas from it. So here we go! up first for me was the battery tray. Used a Savox servo. Found out later you have to shim...
Back
Top