• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

problem

  1. B

    Car steers but no throttle

    Hi My axial wraith has been having throttle problems. When it is on the ground there is no throttle when i lift the car off the ground and shake it well the car is at full throttle the car will usualy move i then can put the car back on the ground and drive it normaly. I have checked the...
  2. W

    Servo Causing issue with Receiver

    So, I have a Spektrum DX4C and a Savox SC-0251 Yesterday, while wheeling on some rocks, the RC just stopped responding and the ESC started beeping like I was no longer connected to my receiver. After doing some troubleshooting, what I discovered was, while the steering servo was plugged...
    • w0pgk
    • Thread
    • problem receiver remote servo
    • Replies: 7
    • Forum: Electronics
  3. S

    Can you reattach a servomotor gear??

    I did my searching both here and on Google but can't find the answer so I'm resorting to asking. I have two servos where the gear on the servo motor have come loose and I'm wondering if anyone have any idea if it's possible to get it to stick again or it the servos are best placed in the "stuff...
  4. M

    Issues with a new Honcho. ADVICE NEEDED

    So I have just gotten the new 2013 SCX10 Honcho for my birthday, and I took it on a camping trip in Death Valley after a few days of breaking in the truck on some easy terrain. Everything is stock as of now. After getting the truck going in Death Valley, it ran well for a few uses, and then I...
  5. M

    Brushed on a brushless esc

    I need help on getting my Novak Timbuk2 Brushless ESC to wor with my Team Teken brushed 35t
  6. milestone

    Faulty Axle Housing? My New TF2, not so happy....

    hey guys i just got my TF2 today and started assembly, i got to the leaf springs where it says to mount them to the axle with m3 6mm screws, well i did and every single one has stripped, so easy, like i didnt even apply much pressure they just didnt want to bite into the housing of the axle...
  7. W

    Axial wraith not turning

    I just recently got an axial wraith for christmas and today i dont know what happened i try to turn it left it wont work i try to turn it right it wont work. So then i lifted the front wheels off the ground and it will turn but it wont stay straight when i let go of the wheel. any suggestions...
  8. E

    Motor spins, driveshafts do not...

    I just got my Axial Wraith RTR and after a charge, I set her down, pulled the trigger and it sorta moved two inches and now appears the drive shafts aren't connected to the motor because it just runs but nothing is going to the axles. Any thoughts? Take it all apart and connect something?
  9. xDiGiTaL SmoKe

    Whats up Colorado!

    Hows it goin with everyone? I signed up for a the forum a while ago while i was still in germany and im finally here and ready to get on the trail. I have a few problems with the rig though and i was wondering if some help could be stirred up from you all. Anyway, heres the problem. Im still...
  10. 1

    mamba max pro problem drives me crazy...

    Hi guys, Iam facing a problem with my mamba max pro.I use it in a crawler set up with a brand-new tekin 13.5 turn sensored brushless motor with 12.5mm high torque rotor,brand new lrp 2s 65C li-po battery.So,whenever i try to overcome an obstacle with the brand-new sensor cable plugged in the car...
  11. R

    Servo is going crazy!!!!

    I have a AE-2 ESC and a AX-3 controller and I have the stock axial servo.. when I turn my controller and truck on my servo goes all the way to the right and stays there and I have no steering at all :/ Please help its no fun having my rig not running :((
  12. ProjectSCX10

    Novak Goat 2s ESC brushless jolts/jerks under minimal throttle

    First electronics post. And I've found nothing on the issue. (Could be my lack of electronics vocabulary, sorry) :cry: I've had a small problem that I havent been able to solve since I got the novak goat 2s ESC and 18.5t brushless. Occasionally when I have the throttle in neutral, and give...
    • ProjectSCX10
    • Thread
    • brushless electronics issue novak goat esc problem
    • Replies: 21
    • Forum: Electronics
  13. S

    BJV4 chassis question

    hi, i just got a BJV4 chassis, and i have no idea how to put it together:cry: i got it used, with no instructions and i am not even sure if i have all of the parts. i also got used chaotic crawlers titaniam links and no clue which ones are which. i am also using losi shocks(i think they are for...
  14. G

    No power!

    Hey me and my dad were out trailing for the first time today. (I just got an scx10 but i had a cc01 for a while now) The CC01 is running an acoms 27mhs radio system and scx10 2.4ghz. For almost the whole time the CC01 had no power or drive. Wasn't too bad sometimes in reverse though.Can someone...
  15. R

    Popping sound with Slipper Clutch!

    I was wondering if any of you guys have experianced a popping noise in the motor or slipper clutch. I'm having this problem when a wheel is wedged between something or when i hold a wheel and pull the throttle and I don't know if it is the motor or slipper clutch. So if you guys know where the...
  16. G

    Please hellpppppp :(

    Recently, when I was at the land rover show, my CC-01 started making a horrible noise. It was coming from the transmission I suspect. Like a clunking/grinding sound. This was when it was under any slight pressure. I had this problem a while back but I just adjusted the pinion and fixed it. But...
Back
Top