• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

mrc

  1. B

    MRC/Slickrock rear steer

    I just picked up a new MRC and a Slickrock, I want to do rear steering, and I think I know what parts I'll need, my question is will I need a servo reverser if I keep the stock 2 chnl radio and use a y-harness for the servo?
  2. J

    Thrift shopping at its best, a MRC build...

    (Note: If this needs to be moved please let me know, its a scaler, but also a MRC!) So, anytime I am at the thrift stores I always roll over to the toys to see if I can find something cool to play with. I ran across this beach toy that looked very close to a Jeepster so i had to have it...
  3. C

    SR3000 RX on Losi MRC - wiring ?

    Hi all, i recently got a Losi MRC, used, with 4 wheel-steering (stock Losi radio for now). I have a Spektrum DX3.0 and SR3000 receiver, so i figure there should be a way to wire it so that i can take advantage of the 3 channels to run the rear steering separate. why? i dont know yet, because i...
  4. BigJon

    Losi MRC or MRCP

    A LHS has a MRCP that is 229.99 and a MRC for 239.99. Should I go for the pro roller or the rtr? I don’t have any support equipment (tx,rx,servo,motor,esc,bat) I know it is an opinionated question. I don't know what way to go. Any bit of help would be great. <?xml:namespace prefix = o ns =...
  5. J

    New and need a body

    Whatsup everyone, I'm new to this forum and had a question. I've been looking online for a body to fit my L Trail chassis scaler project. I've searched and seen just about everyones build, but most store bought bodies have been from years ago. All the local department stores have nothing even...
  6. pixelnate

    Anybody still selling the MPC Pro rollers?

    The usual suspects have all sold out. Just wondering if anyone knows where I can still pick one of these up?
  7. A

    Thinkin about buyin a mrc

    Hey all I'm Lookin at this mrc on craigslist for $250 guy says it's all modded except axles. Is this a good deal? Comes rtr
  8. pixelnate

    ? about MRC outboard shock mounting

    I have tried searching the forum, but because there are so many good bits of info buried inside build threads or other tech threads whose titles don't accurately describe the contents of the threads, I have been unable to find an answer to my question. What size screws should be used when moving...
  9. EricTheRitt

    battery / battery charger question

    i just bought a losi xcelorin 7.4 1000 mah battery lhs said a regular lipo charger would work but none of my charge ports are small enough. just slightly too big. my charger is a wall charger/ballencer nothing fancy and i only have one lipo so im not ready to get another one yet what ballance...
  10. J

    tranny help

    Hey folks, just picked up an mrc for 40$, and i'm juiced! Turned the fake beadlocks into real ones, mounted up a set of 1.9 rok lox i have, replaced all the steering linkage with 1/10th stuff, and added an rc4wd widening kit. But when i set it down for the first test run, noticed real quick that...
  11. droopmodmrc

    Carbon fiber GC3 anyone ?

    Is there going to be a carbon fiber gc3 available?
  12. E

    HPI Defender Crawling in rapids/trails

    Holding cam in right hand and controlling throttle with index and steering with my thumb on a pistol Airtronics 2.4 ghz.:shock: It's tricky I tell you! "thumbsup" <object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/YZ3NwmlfO5M&hl=en_US&fs=1&"></param><param...
    • Evandiego
    • Thread
    • 2.2 scale axial hpi mrc wheely king
    • Replies: 0
    • Forum: Videos!
  13. G

    newbie with MRC clone

    hi all, first of all. this is great forum with a wealth of info. glad to be a member. i just bought an MRC clone and now i'm hooked. it was so cheap RTR so i thought i just buy one to fool around with. that was 3 days ago. i googled around and found that my TEAM INFINITY - CUTE PANGOLIN also...
  14. droopmodmrc

    GC3 purple anodized metalcast

    Just got my new chassis. Let me know what you think. This stuff worked great. Takes 7 days to cure fully, but is dry to the touch in one hour. "thumbsup"
  15. droopmodmrc

    Proline Rockstar body mount holes for Gc3

    Just ordered my Gc3 chassis and just wondering if anyone has a pic of where the body mounts go threw the top of the proline rockstar body. trying to get everything ready for when it gets here. also does it come with body mounting pegs? and do you use the stock lower links for the uppers? and...
  16. droopmodmrc

    Loose bead locks on rear tires

    I got my rear Bead locks set to just barely pin the tire. I tested and I tightened, and then I tightened some more. Now I got it set perfect so the rears just slip right before a forced roll over from the usual rear traction bite .and when you get jammed up it acts very much like a dig. some one...
  17. droopmodmrc

    What to break next ?

    So here is my setup... Flat irons cut'n'shut and butchered proline titus beadlocks integy bent lower links losi threaded alum shocks custom 4 link front and rear losi frenzy 370 motor (modded motor mounting plate to fit motor ) venom 2s lipos 1320 mah 20c burst and a small 430 mah 30 c burst...
  18. droopmodmrc

    370 frenzy motor

    any info on how the losi frenzy 370 motor does in the mrc i also have a 370 insane motor in my desert buggy so the frenzy can go in the buggy and ill use the insane in the crawler . witch do you figure does best out of those to in the crawler . thanks for any input"thumbsup"
  19. D

    My MRC

    Well ive had my MRC for a almost a year now and it still looks brand new. Ive always told myself i was gonna take pics and never did till now. So as you see in the pics its pretty plain besides moving the battery forward and located the esc and tx to the shock mounts. and i did the battery train...
  20. Crawl_Before_Walking

    Minera Lead Mines GTG

    Minera Lead Mines, North Wales. 13/02/2010 A few rigs, a few guys and a lot of rocks, roots, rubble and crashes. Part 1: http://www.youtube.com/watch?v=mRwZI0C9JVE Part 2: http://www.youtube.com/watch?v=eFT1EZlKoDI 8)
Back
Top