• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

links

  1. I

    Panhard rod shifting axle

    Just built a scx10 clone from parts I got and after installing the panhard rod is see that it's too short and was pulling the chassis to the passenger side. After trying some washers I was able to get it as straight as I can but when I compress the shocks it is pulling the chassis to the driver...
  2. C

    Super lift dual front shock mount with links?

    Building my first TF2, managed to find a superlift dual front shock mount, was planning on leaving it leaf sprung. Well I put the 4 and 3 link kits on. I’m reading that dual spring shocks are the way to do this setup, but would it be possible or practical to run the dual scale setup up front...
  3. J

    Add weight, keeping CG low...

    Hi All, I'm new to Crawling. I have a stock SCX10 II Honcho, and would like to add weight around the axles and wheels, keeping CG low. As I'm new, I'd like to start with budget options. Would Ebay, Atees, etc be any good? Any suggestions (incl. Beadlocks and tyres), with links would be a great...
    • JPK81
    • Thread
    • axle axles beadlock wheels links weight
    • Replies: 7
    • Forum: Axial SCX10 II
  4. Z

    SCX10II RTR Shorter Links

    I am not new to RC but I have never tried to shorten the suspension links. I got an Axial SCX10II for Christmas and I want to put the Proline Ford Bronco body on it. I was wondering if I could put the 12" links from the original SCX10 on the SCX10II.
  5. Z

    SCX10II Links

    I am thinking about getting the Proline 1973 Ford Bronco body, but it has a 12" wheelbase. Could the 12" aluminum links for the first generation SCX10 fit my SCX10ii?
  6. S

    Links dimensions for Chaotic Switch shassis

    Hello, I have an offer for ChaoticCrawlers Switch chassis. It's without links. Can anyone tell me what are the link measurements for stock v1 berg axles?
  7. Hypergarage

    Scx10 Help

    Hello. So I noticed that there are 3 different lengths for scx10 links. I did some more research and as far as I know the Honcho uses shorter links then all the other scx10s. I have the Scx10 Deadbolt and my question is which size of aftermarket links do I get? I'm looking at an eBay seller...
  8. T

    Hardcore Rc Titanium links for the axail wraith

    This is our stage 1 complete kit. We use grade 5 titanium materials for that extra strength. Our kits sale for $84.95 plus shipping. Our website is hardcorerc.net.
  9. S

    draglink/tie rod ends-solid or removable

    have a wraith spawn and I getting ready to upgrade and bullet proof it. I am looking into the draglinks and tie rods to upgrade an alloy/metal and noticed that I see some options give you the links in ally/metal but you use plastic ends. there are others that the whole link is solid and has the...
  10. B

    Shorten links

    Hi this might be a dumb question. Thats why im here. I have a custom dodge ram body on my scx10. I want the wheel wells to line up better than they are now. Ive already bought axial aluminum links to shorten it some. Is it possible to cut the links shorter. If not im just keeping it the same i...
  11. ProjectSCX10

    Anyone running Blue Monkey RC Aluminum parts?

    Just stumbled across these parts. Vaterra Twin Hammers, Blue Monkey RC The chassis plate and the rear lower links look like great designs! Any conformation on awesomeness from these?"thumbsup"
  12. U

    Wroncho Link Help

    I'm throwing together a Wroncho and am on the fence about the link/trans configuration. I see that some people flip the trans and put custom links on, or raised tabs, and some leave the trans as is and use standard links. My question is can you guys chime in on what you did and why? And how it...
  13. B

    Steering wobble

    I have yet another problem that has been bugging me for some time. When I turn front wheels all way to either side and apply medium or full throttle, the front axle becomes really wobbly. Here is a video: Steering wobble - YouTube I wonder if it's normal to behave like that. I tried to figure...
  14. S

    delrin rod???

    Any body know where I can find some white delrin rod for links?
  15. J

    SCX10 4-link question

    The Honcho "kit" comes with alum links...is stock a 3-link or 4-link setup?? If only 3-link, can I get the 4-link truss only? Or do I have to buy the alum upgrade kit for it even though the rig kit is already including the aluminum links??
  16. eisman

    UGC Viper and Straight Upper Links

    These questions are aimed at those of you who are running the Viper chassis and VP upper link mounts front and rear. Has anyone had any luck using straight upper links? Did you inboard or outboard the links? Were there any issues with suspension binding or links hitting the chassis or motors...
  17. W

    homemade steering linkages

    I did my linkages for the front and back, 4 link. I now want to do the steering. I am going to keep the servo on the axle as I prefer that. I have the linkage connecting both wheels bent up and ready to cut out of 8/32" all thread. I'm not sure how to do the upper steering linkage, the one...
  18. X

    Bjv4 links?

    I am building a bjv4 xr-10 and was wondering if you could use the axial aluminum hi-clearance links as lower links like you can with the stock chassis. I know that you would probably have to use longer rod ends to make them reach, that is not the problem. I want to know if the angle would be too...
  19. RebelRacer

    SCX10 TR Links

    Ive posted a couple of times in some other threads and havent gotten an answer yet, so i figured id try it like this.... does anybody know if the SCX10 TR Aluminum Links Upgrade Set is on the market yet and if so where can i get one at? any information would be greatly appreciated!!
  20. J

    Anybody make their own links?

    If so what do you make them out of and wheredo you get the taps to tap them? JEFF
Back
Top