• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

linkage

  1. P

    Advice on bending aluminum linkage...

    For a mod I am doing I want to bend a straight aluminum 4-inch steering linkage such that there is a small indentation in the middle of the link so it avoids hitting the differntial/donut when in full-turn. If I am able to make subtle bends in it I can make it the exact length and shape that I...
  2. T

    Vanquish bumper cms steer link

    Hey guys i picked up the vanquish front bumper cms kit thinking that the stock steering linkage would work but they dont. The drag link is too long and the eyelet on one side is facing the wrong way. So to fix this i cut my plastic drag link and shaved it to the right length and used tire glue...
  3. S

    Poor Man's DIY Link Extensions

    I had an extra set of lower links on hand so I cut the drilled and tapped portions (15mm) off of the ends with a tube cutter, tapped them all the way with an M4x0.7 tap, ran some M4x20 set screws into each end of each extension, and attached them to the links and rod ends. I've ordered some...
  4. W

    homemade steering linkages

    I did my linkages for the front and back, 4 link. I now want to do the steering. I am going to keep the servo on the axle as I prefer that. I have the linkage connecting both wheels bent up and ready to cut out of 8/32" all thread. I'm not sure how to do the upper steering linkage, the one...
Back
Top