• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

led

  1. JatoTheRipper

    Wireless LED Light Connector

    I haven't tried this personally so don't shoot the messenger. Some guy on Facebook stated that he is using this simple and inexpensive wireless "charger" to wirelessly connect the LED lights on his body to the power source on the truck. It's not the smallest item, but it is cheap...
  2. G

    3D Printed Accessories and Light Bars for Twin Hammers

    So i wasn't really happy with the selection of lighting for the twin hammers, so i made my own and i wanted to share mine and get input. So please tell me what you think so far all the files can be found here: https://www.thingiverse.com/thing:2397853
  3. P

    LED light controller DIY

    I didnt like the modes available on the LED controllers I was finding so i made one that I like. If anyone is interested I can post circuit and firmware. Its based on the Metro Mini https://www.adafruit.com/product/2590
  4. K

    diy led light bar for the yeti

    Picked up some 3-inch waterproof led bars for $2 from a local car accesory/aftermarket store and asked a friend to 3d print the housing that can be downloaded from thingiverse.com for free. 10 mins of soldering to tap it inline with my lipo and it looks ok for a night trail. Didn't want to...
  5. tinyT1m7

    Mamba max solid red and yellow in nuetral

    I just updated the firmware on my mamba max pro and recalibrated the esc. It calibrates normlly, but after all the leds blink, in goes to a solid red and yellow for nuetral. When throttling forward I have a solid red and blinking green. Then when throttling forward faster, it goes to a normal...
  6. J

    Different lighting systems

    I've been looking up every type of lighting system out there and there's nothing that has everything I want. I can't go DIY because I can't actually use my hands due to loss of function. I really want headlights, red tail lights, brake lights and reverse lights. I'm not too fused about...
  7. T

    Will these batteries power lights?

    Ok, i'm new to the crawling/ car side of RC but used to run heli's. I have a few good lipo's laying around that I want to put to use (hopefully) when I get my scx10. The batteries are both 7.4v one of them is 900mAh (25c) the other is a 800mAh (10c). These are both heli batteries but was wanting...
  8. A

    SMD Light Strip

    So i got a couple vanquish Light bars and and they look nice and all but now I'm looking into making my own with the cuttable 12v smd light strips, they are pretty cheap on ebay and i just want to make really cheap insanely bright light bars. Not worried about housing them yet just wanna learn...
  9. johnnyluv

    Johnnyluv's First Scale 4WD RC truck (SCX10 Deadbolt)

    Well, here it is...my first scale truck! I got it yesterday, clipped the useless Tamiya connector, soldered on a Deans, installed my beadlocks (using Trepadors from a JK kit, which I plan to use in the future, as a short-wheelbase conversion, to mount toy RC hard bodies), and finally...
  10. Farmers00

    LED Lights

    Hey guys! I have a quick question on lighting for TWH. I was looking at getting the Vanquish Rigid Lights since they seem super easy to bolt on. It says they require a 3s to run though and i am only using 2s since i can't seem to find a 3s shorty Lipo. Also, i assume the LED's plug into the...
  11. D

    Scx10 LED light help needed.

    Ok fellas this is all new to me. I just sold my SC10 that I've been racing for a couple of years. I am going to be ordering the Jeep Rubicon RTR in the next couple of days and was wondering if you guys could help me with what Light Kit I should buy. I found this one: http://bit.ly/USmZKK But...
  12. ChrisShooting

    LED lights and controller running off LiPo

    Ok, I assume this would be the place to ask...I'm wanting to mount my light controller in a box on the body of my SCX10 and I want it to come off cleanly without having to fiddle around trying to unplug the lights from the receiver since the receiver will be in its own box on the chassis for...
  13. heyok

    Dual Power Headlight and Driving Light Controller

    Do you have one of those crazy bright light bars that runs on 12 volts (or 3S Lipo) and also have lights that run from 6 volts (receiver voltage)? This controller works on a three position channel or linear channel and will let you have your lights off, or just the low voltage lights or both...
  14. L

    led bulbs

    Prisma LED is Australia’s No 1 LED superstore importing & exporting around the globe. we are confident we will have a solution for any application. We are a one stop shop for all, and are more than happy to assist you, to illuminate your world. <!--[if gte mso 9]><xml> <w:WordDocument>...
    • lussi
    • Thread
    • led led gold coast led online store
    • Replies: 0
    • Forum: Electronics
  15. C

    Additional LED lights

    I recently received LED lights for a light bar on my scx10. I want to keep my 2 red LEDs and the white 2 LEDs that I ready have and add 4. The LEDs are already wired and ready for use, I just don't know how to add them to what I already have. Do I Jerry rig em? I don't have another place to plug...
  16. heyok

    Auto Hazard Lights with Brake, Reverse, Driving Light Controller

    :idea:Like some of my other brake light controllers, this one also operates reverse lights, forward lights and has a convenient "always on" output. The new feature is the automatic hazard lights. When the brakes have been on for half a minute, the hazard light output begins to flash until the...
  17. B

    Help! RC4WD LED control unit

    Hi! I got: Scale Lighting System (Ver 2) And I can't use it in my Trailfinder 2 as the LED are to big! Can I just remove the 5mm and replace them with 3mm? The only 5mm I need is for the front (head-) lights, the rest are supossed to be in 3mm... Can I ad two 3mm for one 5mm? How does this...
  18. heyok

    How to wire LEDs

    This will show you how to wire some LEDs to light add some light to your rig. Two bright red LEDs are going to be wired to a plug that you can connect to your receiver to power them up. The plan is to end up with a servo plug going to a length of wire to an LED, then another length of wire to...
  19. heyok

    Just the Brakes - Brake Light output only

    Really simple to install device that lets you have working brake lights. To put it in your rig, just unplug your ESC and plug this into the receiver and the ESC into it. Connect your brake lights and you are done. Part Number: BK $15 Want a pair of Red 5mm LEDs that you can plug into...
  20. N

    summit light bar on a wheely king (stock rx)

    hi, noob here. i just bought the 4 led summit lightbar for my wk basher. when i plug it in to the BAT port on the rx, it lights up nice and bright BUT... it immediately flickers when i touch the throttle or steering. the leds also seem to get brighter when i do this. is this a power shortage...
Back
Top