• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

dig

  1. T

    Setting up Two Position DIG on Capra - Help Please

    So this may be a totally stupid question, but I am way behind on understanding electronics. Just built a Capra with DIG function, have an SRM-315 Rx and a Spektrum DX5C Tx. I have the DIG Servo (Spektrum SX-107) plugged into the AUX1 port of the Rx. So I have tried to program a momentary...
  2. M

    New R1 build

    Just picked up my R1 kit from my LHS yesterday. Little bit of a snafu as the distributor first sent it to Utah rather than my Oregon store. Gonna be my first foray into 4ws and dig. Funny, those bits arrived before my kit did. I plan on posting some photos as I go. The manual seems pretty...
  3. S

    DIG unit and TRX-4

    I tried to find some information about the DIG unit for the Traxxas TRX-4 but I found nothing. Of course I found information about DIG unit for Axial and Gmade but nothing about Traxxas. Exist any DIG unit for Traxxas TRX-4? Is there anyone who has a DIG unit on their Traxxas TRX-4? Or could...
  4. M

    Crawler with front and rear dig

    I'm a little new to the idea of crawling, but I know I want digs. As many of them as possible, which I believe to be 2! As most seller web sites are less than ideal for working out full specs, could you lovely folks let me know what is available at the moment with front/rear dig or front/rear...
  5. T

    Thinkcooper's first R1

    Just picked up an RTR R1, and about to start messing around with tweaks and mods. Really digging the crawler so far - it's a blast to drive. In the past I've built up a number of RCE carbon Slash configurations, spent too much money, but sure had some building. Was dancing between a scale rig...
  6. S

    Help me wire HobbyWing QuicRun WP 860 Dual motor ESC with ROCKER DIG II

    Hello, Newbie here... I have HobbyWing Quicrun WP 860 dual motor esc and I want to install Rocker DIG 2 from rc4wd. My problem is that I can't figure it out how to wire the esc and the dig. There is some diagram for the dig (can be found in the links bellow) but I can't figure it out how to do...
  7. B

    m2 vs "the dig"

    Other than being much simpler to install what are the pros and cons?
  8. B

    My First Crawler R1

    So guys i got the Gmade R1 kit as a gift that I requested because it just looked so awesome!! So while i waited i did some research on it and found it excelled in looks but not much else! I looked for all the different option parts and then found out that the gears in this thing were weak and...
  9. S

    4-Position Dig for Axial Trans

    Would any of you be interested in an after market, bolt-on dig unit for the Axial transmission that allows you to shift from 4WD to Front Wheel Drive to Front Dig (rear axle locked) to 4WD with Rear Underdrive?
  10. Shenanagin5

    moter wont run after CC BEC removal for dig

    I just got the dig kit for my scx-10 and putting it together realized I would need the ch 3 slot my BEC was plugged into, so I took it out of the mix reconnected the red wire and plugged in the battery. Both servos 1 and 3 work but no motor. Lights go ch 2 I assumed. I could get rid of my lights...
  11. S

    RC4WD R2 Dig Install In R1 Chassis

    This is my first crawler build (actually my first RC build aside from a heli I built in college) so I have no idea what I'm doing. I'm attempting to install the R2D tranny in my R1 tuber chassis. I've seen bikerzee's install thread for the Stealth chassis and, as he noted, the Stealth chassis is...
  12. B

    dig question

    Just posted this in the wrong spot so sorry in advance lol ive got an xr with novaks "the dig" dig unit with a traxxas 4 ch remote with a 3 position toggle. I've gotten a second esc already so is there any reason that it wouldn't work? I took it to my local hobby shop and they said I need...
  13. Y

    Custom Mad torque dig

    I just thought that i would show off my custom dig that i made our of a old servo, 3 position switch, some wire and a old cork place mat. I started off by getting a old servo and a circular servo horn and cutting a hole in the servo horn. With the switch i mounted it to the cork board with the...
  14. W

    TQi 3ch dig mod??

    Well I've joined quit a while ago , and a lot of my questions were answered without me asking if I looked hard enough. Well here it goes. .. I have a Berg , with 2 Sidewinder micro sport esc, CC 10amp BEC wired directly to the servo. One red wire from 1 of the esc disconnected from the rx the...
    • wally197203
    • Thread
    • berg dig dual sidewinder esc moa dig two position tq mod
    • Replies: 1
    • Forum: Electronics
  15. M

    New Axial XR10...Have some Q's

    Whats up, Im pretty new to crawling, had a losi 1/18 scale for acouple years & used it stock. I just got my XR10 with the M2 dig & rock star 45 turn motors. Heard about the clearance issues with the terra claw motors between the links. Anyone know if these have the same issues...
  16. milestone

    DIG unit to go from 2wd to 4wd?

    Basically I like the Tamiya bruiser and how it goes from 2 wheel to 4 wheel drive, I heard you can accomplish this using a DIG unit? From what i read though a dig only engages or disengages the REAR ? I want it to disengage the FRONT.... is this possible? Perhaps install it backwards?
  17. R

    bully moa with rocker II dig, gt3c hacked controller programming issues!!

    i have a bully moa with the dual outcry esc. i bought a rocker II dig and have a gt3c radio that is hacked with the 6.1 software. i have tried programming it numerous times with different programs on this site and can't get it to control front and rear dig! does anyone know how to do this? i...
  18. S

    Converting an Axial SCX10 to a selectable 2WD / 4WD transmission.

    Converting an Axial SCX10 to a selectable 2WD / 4WD transmission using an RC4WD R2 Dig transmission. <iframe width="640" height="360" src="http://www.youtube.com/embed/YnXNO1tZVF8" frameborder="0" allowfullscreen></iframe>
  19. S

    Miniqlo MOA with DIG.

    I have been looking into selling my Losi Mini, and buying a Miniqlo. Has anyone heard about how well the miniqlo's work? I heard they have motor probems, but there is no real Reviews on them. Please tell me if you know anything about them, thanks!
  20. G

    Wraith trans w/dig in AX10

    I had a stock AX10 trans with upgraded out drives and a DNA dig unit on it. I wasn't happy with the DNA; it was to big, the servo mount/ shift linkage was wonky, and it all around just gave me fits. I'm running a STRC delrin skid, with 4mm rod ends, which would not clear the DNA case, so I had...
Back
Top