• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

bully 2

  1. S

    XVD or Universals?

    Hello everyone, I'm planing to build a bully 2 from a kit. I actually build one years ago, but sold it (regret it). Anyways, I see that rc4wd released universal shafts: https://store.rc4wd.com/Universal-Set-for-Bully-2-Competition-Crawler-Axles_p_7209.html If I remember correctly, my 1st bully...
    • ssh22
    • Thread
    • bully 2 cvd universals xvd
    • Replies: 13
    • Forum: RC4WD Bully
  2. C

    The perfect Bully V2

    Hey guys! I have recently got into crawling. I started with scalers and worked my way up to moa. I have successfully built my own moa and honestly, I am a bit obsessed! After the moa with 4WS I wanted to move to something more... Elegant! Therefore, I am on a mission to build the perfect Bully...
    • Cage
    • Thread
    • bully bully 2 bullyv2 help me! moa
    • Replies: 6
    • Forum: RC4WD Bully
  3. M

    Micro comp brushless (Newbie to crawling)

    I am new to crawling, and am completely enamored of this (scratch built?) Micro comp brushless vid on YouTube: https://www.youtube.com/watch?v=ma1gMVBeGXc I have a ton of questions but will start with just the basics. I appreciate your help. My intended use initially is to amuse my Labrador and...
  4. A

    Dravtech shock setup

    Those of you that are running Dravtech shocks on your Bully2's, what is your setup? which pistons and springs are you running and what weight oil are you using? I have a stock RC4WD Bully 2 chassis from the kit with no mods so far
  5. D

    Dan's Bully2

    Hi everyone, I wanted to share some of my recent experiences with the RC4WD Bully2 RTR model. Just wanted to clarify that I'm by no means a comp driver (no such comps where I live :sad:), therefore it was all meant for having plain RC crawling fun. I'm somewhat new to the RC world, just have a...
    • Dannko
    • Thread
    • bully 2 comp crawler moa bully rc crawler upgrade parts
    • Replies: 8
    • Forum: RC4WD Bully
  6. 8

    Krazed Builds KR4 Rear Tungsten Weight Holders

    3D printed made for Dlux rear housing but will work on KR4 housing. Holders ID is 16mm and KR4 rear lock out OD is 15.50mm. You could probably get away with just a grub screw or two, but I used some 1/2" heat shrink tubing to fill the tiny half mm gap. I stretched it and got it to fit, then the...
    • 84yoda
    • Thread
    • bully 2 kr4 moa rc4wd rear weight holders
    • Replies: 0
    • Forum: RC4WD Bully
  7. E

    Evos bully 2 rtr

    Hey everyone, So my bully finally got here, couple things weren't very impressive. The amount of loose screws was pretty lame. That and the fact I was completely missing an axle pin to hold the hub to the axle. Also the wires coming off the bottom of the motors and running on the bottom...
    • Evo93
    • Thread
    • build bully 2 moa rtr
    • Replies: 215
    • Forum: RC4WD Bully
  8. 8

    B2 RTR first breakage!

    Here's the pictures. Not what I expected to break first. Im about to ordered a new pair ($70 bucks), hopefully this won't happen again but if so, I'll be looking into new rims. Outer wheel face, front side: Back side:
    • 84yoda
    • Thread
    • bully 2 comp crawler rc4wd rtr
    • Replies: 13
    • Forum: RC4WD Bully
  9. T

    VP chubs on bully 2's ?

    does anyone know and can they confirm if vp chubs and knuckles work on bully 2's ?
Back
Top