• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

axle

  1. new2it

    Found an old in-progress build

    Been out of the scene for a while and have a project that's been sitting around for years. I don't believe any of this was ever used. Is a set up like this still interesting to anyone? https://imgur.com/gallery/4hneqcC https://imgur.com/gallery/Pwayfwy
  2. J

    Add weight, keeping CG low...

    Hi All, I'm new to Crawling. I have a stock SCX10 II Honcho, and would like to add weight around the axles and wheels, keeping CG low. As I'm new, I'd like to start with budget options. Would Ebay, Atees, etc be any good? Any suggestions (incl. Beadlocks and tyres), with links would be a great...
    • JPK81
    • Thread
    • axle axles beadlock wheels links weight
    • Replies: 7
    • Forum: Axial SCX10 II
  3. A

    Element RC Sendero with Portal Axles!

    Hey, new here so sorry if this has been done before but I did lots of research myself before taking the plunge and had not seen any. Anywho, this is my Element Sendero with portal axles. I used a KYX Racing portal axle kit designed for the SCX10 ii. The fronts go on really easy. They fit like a...
  4. O

    Axle problems and suggestions

    Hey everyone, I have an old Rcp Wreckluse tube chassis that I have put together with a styrene interior and it's looking great. The only thing is it is quite heavy and with a Holmes hobbies high torque motor in it it's a little hard on the drive train without a slipper. With I can't seem to...
  5. JatoTheRipper

    HPI Venture Axles Vs The Competition

    Do any of you have the dimensions of this axle housing? I'm specifically looking at the diameter of the axle tubes at the thickest point, the height and width of the pumpkin, and the side of the aluminum mounting points. Photos with side by side comparisons to Axial SCX10 II and Vaterra...
  6. S

    SSD knuckle and axle compatibility HELP NEEDED

    Hello team I have been building up my OG scx10 for a few months now. I added the SSD D60 axles, cause they HOT (and cheeeep), but the woeful steering was not going to cut it, so I went ahead and dropped $80aud on the SSD pro steering knuckle upgrade kit thing (Pro Steering Conversion Kit for...
    • Stray
    • Thread
    • axle d60 pro steering ssd sxc10
    • Replies: 3
    • Forum: Axial SCX-10
  7. C

    Project TAZ C0/1/2 capable rig

    Lets start this off with the reason behind this build... I wanted to build a rig that was capable in 3 classes with just a simple tire change. But i didnt stop there, i wanted to be able to put any scale axle under it without taking any gearing out or putting any in. I found an issue with this...
  8. T

    I must be completely incompetent...

    Need to change my name to n00b or something.... Ended up picking up the SCX10-II kit. Finally had a chance to get building after work last night. Step 1 - axles. Awesome - just like my old Scorpion, but smaller ring & pinion. EZPZ. Followed the directions to a "T". When finished, I...
  9. L

    Wheels upgrade

    Hi, I am starting into the RC hobby and I decided to go with a cheap crawler to start. It is a $25 one I got off the internet but it does rhe job for now the problem is that it bottoms out easily when climbling sideways so I decided to install bigger wheels. When I received the wheels, I...
  10. L

    Axle, differential gears not engaging!!

    hey there, i have an scx10 and i am having big problems with the axles. a part on it broke and after 3 weeks i have replaced it and now the front axle is clicking when it is put under pressure for example when i hold the back wheeels and rest the front wheels on the ground they click.... the...
  11. G

    Rapair/upgrade 10.1 vs buying 10.2

    Hello! I have an absolutely stock SCX10.1 kit. I have broke the upper 3rd front suspension link mount on the axle (the bolt in the axle just goes through the hole). Please advise how to solve the issue: - buy new plastic part - use the leftover part from the kit to go 4 link front and buy the...
    • GTIgor
    • Thread
    • 3-link 4-link axle scx10 upper link-mount
    • Replies: 3
    • Forum: Axial SCX-10
  12. T

    SCX10 II axle bind

    Hi All, First time poster! This forum has a wealth of good info, so I decided to join. I'm working on my first RC. It's the SCX10 II Jeep Cherokee. Never had any plans on getting into RC, but I came across the above kit and couldn't pass it up. Love tinkering with things and I'm a die hard...
  13. Hypergarage

    Rear wheels spin opposite from front!!!

    This is extremely frustrating. I have 2 boom racing scx10 all metal axles that are brand new and I just installed them. The front wheels spin the correct direction the rears spin backward. I opened the rear axle to switch the diff around but the way the axle is built it won't fit when switched...
  14. Ghost Koi

    Narrow the TF2?

    Alright, as some may have already seen, I am going for a more "stock" look for my Trail Finder 2. Since I was able to successfully lower my truck (thanks everyone for the help "thumbsup"), I am now wondering how I can narrow the wheel base? Does the truck use spacers that I can remove? Are the...
  15. E

    Help! Vintage Bruiser axle issue.

    Well I got a bruiser and I'm half way through restoring it. I noticed the axle didn't turn well and took it apart and found this. 12376020_10205478436455796_7639777490173499634_n by DFW Photography, on Flickr Any idea where I can get just the inner axle set without paying $80 on eBay for a...
  16. D

    Axle tight when diff. locked.

    Just building the axles and housings up on my CR-01 Land Cruiser. Everything turns smoothly until I screw in the differential locking pin then it goes a bit tight to turn and feels a slightly crunchy. Is this normal? Do they just need time and use to wear in? Regards, Dave.
  17. Ghost Koi

    Some "play" in my Front Axle (SCX10 Jeep CR Edition)?

    Hey guys, I just noticed after a short run today that my Jeep Frame (specifically the cross member) was getting "stuck" on my Servo Arm (technical term:lmao:?). It appears the there is some movement or "play" in the servo and when I (or anything) pushes it forward, the frame gets caught on the...
  18. O

    Redcat steering thread

    Pics added 7/18. I have been hesitant to start this thread because I have no means of taking pictures and proving what I say. I have been tinkering with my Redcat Rx10's steering for 3 years now. Here are some of my actual experiences and opinions based on experiments I have tried. I'll start...
  19. ChrisShooting

    ChrisShooting's Southern Buggy

    Since this is finally nearing completion here in the next week or so, figured I should start a build thread on this. It starts with a welded chassis I picked up from a guy for next to nothing. I liked the looks of it so hell, why not right? Then I decided to just go stupid with it and started...
  20. G

    "Xtra aluminum axles" review

    Anybody used these axles on a Wraith? Xtra Speed Assembled Aluminum Front Axle Axial Wraith 1 10 RC Car XS AW23038 | eBay Or this link. Front axle , ,(XS-AW23038) by Xtra Speed Assembled Aluminum Front Axle Rear , ,(XS-AW23039) by Xtra Speed Assembled Aluminum Rear Axle I want to upgrade...
Back
Top