• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.
steering angle difference between stock Gmade R1 portal axle dogbone on left and CVA kit from JunFac on right. just need to modify knuckles and/or hu

steering angle difference between stock Gmade R1 portal axle dogbone on left and CVA kit from JunFac on right. just need to modify knuckles and/or hu

  • Reaction score 0
  • Comments 0
would love to be able to drive across the rope bridge but im 2" too wide. the XR did it perfectly

would love to be able to drive across the rope bridge but im 2" too wide. the XR did it perfectly

  • Reaction score 0
  • Comments 0
the crew, had a really great day of running. was a shake down run for my custom wraith and the XR-10. red/silver wraith has seen this course quite a

the crew, had a really great day of running. was a shake down run for my custom wraith and the XR-10. red/silver wraith has seen this course quite a

  • Reaction score 0
  • Comments 0
first rollover, tryin to get some assistance, dont have the winch installed yet

first rollover, tryin to get some assistance, dont have the winch installed yet

  • Reaction score 0
  • Comments 0
moderate amount of flex..... i'll get some more out of it later

moderate amount of flex..... i'll get some more out of it later

  • Reaction score 0
  • Comments 0
original setup with just the adjustable upper link. pinion aiming way to high, plus with the 4ws that just wont work right for the rear steering angle

original setup with just the adjustable upper link. pinion aiming way to high, plus with the 4ws that just wont work right for the rear steering angle

  • Reaction score 0
  • Comments 0
much better pinion angle than before now that i have the adjustable lower link/shock mount installed

much better pinion angle than before now that i have the adjustable lower link/shock mount installed

  • Reaction score 0
  • Comments 0
thinking i will eventually get the aluminum 7* c-hubs and knuckles.....just not yet

thinking i will eventually get the aluminum 7* c-hubs and knuckles.....just not yet

  • Reaction score 0
  • Comments 0
parts are here, time to upgrade before the first run

parts are here, time to upgrade before the first run

  • Reaction score 0
  • Comments 0
borrowing this picture from a fellow wraither with portal axles. he did this mod and i love it. showing before (LH) and after (RH). this is what im

borrowing this picture from a fellow wraither with portal axles. he did this mod and i love it. showing before (LH) and after (RH). this is what im

  • Reaction score 0
  • Comments 0
considered a low rider rat rod wraith at first during the assembly proceess.... as you can see in the other pictures, that didnt happen

considered a low rider rat rod wraith at first during the assembly proceess.... as you can see in the other pictures, that didnt happen

  • Reaction score 0
  • Comments 0
new bumper from MG200 Designs. soon to be delivered, installed and tested

new bumper from MG200 Designs. soon to be delivered, installed and tested

  • Reaction score 0
  • Comments 0
4ws, just need to install the CVA kits and a little trimming for better turn radius

4ws, just need to install the CVA kits and a little trimming for better turn radius

  • Reaction score 0
  • Comments 0
sitting incredibly high, will lower suspension eventually. portal axles and big bore shocks really throw it up there

sitting incredibly high, will lower suspension eventually. portal axles and big bore shocks really throw it up there

  • Reaction score 0
  • Comments 0
swapped upper and lower links for more ground clearance. see no issues so far

swapped upper and lower links for more ground clearance. see no issues so far

  • Reaction score 0
  • Comments 0
new bumper from MG200 Designs coming soon

new bumper from MG200 Designs coming soon

  • Reaction score 0
  • Comments 0
S

Portal Wraith

  • Items 16
  • Album owner Smithysride
  • Date created
Custom Wraith built from ground up. Ordered Wraith Chassis and went from there
Click to expand...
There are no comments to display.

Album information

Album owner
Smithysride
Date created
Item count
16
View count
17
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

S

Smithysride

Media items
16
Albums
1
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top