• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.
IMAG0121 now for the chassis , I added the little window in the upper "cab" and cleaned up all the inner edges as well as raised the floor by .200" ,

IMAG0121 now for the chassis , I added the little window in the upper "cab" and cleaned up all the inner edges as well as raised the floor by .200" ,

  • Media owner berny 64
  • Date added Oct 26, 2013
  • Reaction score 0
  • Comments 0
IMAG0127 comps over and its time to finish the machine work , this is more like what I wanted . they should be heavy enough to not need knuckle weight

IMAG0127 comps over and its time to finish the machine work , this is more like what I wanted . they should be heavy enough to not need knuckle weight

  • Media owner berny 64
  • Date added Oct 26, 2013
  • Reaction score 0
  • Comments 0
IMAG0095 Wheels weren't finished at this point , beadlock grooves were't deep enough and I wanted to do something with face of wheel for better look a

IMAG0095 Wheels weren't finished at this point , beadlock grooves were't deep enough and I wanted to do something with face of wheel for better look a

  • Media owner berny 64
  • Date added Oct 26, 2013
  • Reaction score 0
  • Comments 0
IMAG0125 all the machine work I put off till after the 1st comp is done . I was shooting for 5 lbs but missed by a half lb , its at 4.5 lbs . I can

IMAG0125 all the machine work I put off till after the 1st comp is done . I was shooting for 5 lbs but missed by a half lb , its at 4.5 lbs . I can

  • Media owner berny 64
  • Date added Oct 4, 2013
  • Reaction score 0
  • Comments 0
IMAG0117 I made the servo guard out a piece of angle aluminum , still waiting for rowdy racing to get some covered battery mounts in stock

IMAG0117 I made the servo guard out a piece of angle aluminum , still waiting for rowdy racing to get some covered battery mounts in stock

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
IMAG0115 wheels finished and shod with white dot rovers , untrimmed or cut

IMAG0115 wheels finished and shod with white dot rovers , untrimmed or cut

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
IMAG0099 the rear wheels assembled minus bead locks , those will be made of aluminium . front wheels are the same . . . but different ;-)

IMAG0099 the rear wheels assembled minus bead locks , those will be made of aluminium . front wheels are the same . . . but different ;-)

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
IMAG0093 I had the patterns of all 24 holes stuck in my head for a week ;-/

IMAG0093 I had the patterns of all 24 holes stuck in my head for a week ;-/

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
IMAG0091 gettin the groove on

IMAG0091 gettin the groove on

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
IMAG0089 cutting 4 wheel halves to size at once

IMAG0089 cutting 4 wheel halves to size at once

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
IMAG0088 hockey pucks , gotta start somewhere

IMAG0088 hockey pucks , gotta start somewhere

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
IMAG0090 now , lets see if I can make these wheels I got stuck in my brain

IMAG0090 now , lets see if I can make these wheels I got stuck in my brain

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
IMAG0087 BURST002 , ok, now about those wheels I've been thinkin about

IMAG0087 BURST002 , ok, now about those wheels I've been thinkin about

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
IMAG0085 cut , paint and hang the body panels , couple stickers here n there

IMAG0085 cut , paint and hang the body panels , couple stickers here n there

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
IMAG0073 . 2 weeks till the first comp of the season . . ok electronics next !!

IMAG0073 . 2 weeks till the first comp of the season . . ok electronics next !!

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
IMAG0069 chassis is done , got some minor work to do cleaning up the inside lines on the upper cab but hay this is "supposed" to be a test fitting , l

IMAG0069 chassis is done , got some minor work to do cleaning up the inside lines on the upper cab but hay this is "supposed" to be a test fitting , l

  • Media owner berny 64
  • Date added Sep 28, 2013
  • Reaction score 0
  • Comments 0
both axles have the RC4WD gears and big bearing kits but I think I'm going to leave the knuckles and c-hubs stock for now . the shocks are stock alumi

both axles have the RC4WD gears and big bearing kits but I think I'm going to leave the knuckles and c-hubs stock for now . the shocks are stock alumi

  • Media owner berny 64
  • Date added Aug 31, 2013
  • Reaction score 0
  • Comments 0
berny 64

another XR10 comp rig

  • Items 17
  • Album owner berny 64
  • Date created
this is the 2nd comp rig I've built but the 1st I'll have made my own links and chassis , the wheels and titanium rear axles are also hand made but I've done those before
Click to expand...
There are no comments to display.

Album information

Album owner
berny 64
Date created
Item count
17
View count
19
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

berny 64

berny 64

Media items
35
Albums
3
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top